Filter
Top Products
11
11
1
X
21
S4359146
(e) Installing the ceiling panel
● Attach the ceiling panel to the chamber.
Drawing the panel downwards sets the panel in
position temporarily with the panel catch (at 2
locations).
● Remove the socket cover of the air-intake plenum
and pass the 8P sockets through it. (Fix the panel
lead wire to chamber side clamper.) (Fig. 3-17)
● Connect the 8P socket (electrical component box
side) to the 8P socket (ceiling panel side) of the
indoor unit electrical component box.
● Reattach the socket cover.
Fig. 3-18
Ceiling panel
Panel catch
Installation screws
(M4 × 1/2 in.)
Duct
connection
flange
Duct connection box
1976_X_S