Filter
Top Products
5
Please Check That All of The Following Parts, In Their Specified
Quantities, Are In The Box You Received From Saleen:
OBTAIN THE FOLLOWING TOOLS:
• Drill
• 1/8” bit
• 5/16” bit
• Torque seal
• Center punch
• Electric dremel
• Carbide dremel bit
• 7/16” angled gear wrench
• ¼” drive ratchet
• ¼” drive 7/16” socket
• Red Loctite
• Paint thinner
• 3M Automotive adhesion promoter #06396
• ¼” diameter rope, 12” long
10-1108-B12088* REAR WING KIT, W/ BOX & INSTRX, 05 S281 S/C
1
06-1108-B11431* REAR WING KIT 05 S281 S/C 1
00-9009-C12058*
RUBBER BUMPER 1/4" OD ADH BACKED 1/16" PROJ 2
06-1108-B12057* REAR WING ASSEMBLY, PAINTED, 05 S281S/C 1
06-1108-B11705* REAR WING ASSY UNPAINTED 05 S281 S/C
1
06-1108-C09554 REAR WING 05 S281 1
00-9002-C11830* STUD PERF BASE 1/4-20 3/4" LONG Zn/YL PL ST 8
06-9000-B11704* WING HARDWARE KIT 05 S281 S/C
1
00-9004-C12007* WASHER, M6 ID 18MM OD, 18-8 SS 8
00-9003-C11802* NUT, ACORN HEX, 1/4-20, 18-8SS, 7/16 Width, 15/32 Height 4
00-9003-C11803* NUT, HEX, 1/4-20, 18-8SS, 7/16 WIDTH, 7/32 HEIGHT 4
00-9009-C11813*
PLUG, OVAL, FORD STOCK TAIL LAMP
2
00-9006-C08519* DOUBLE SIDED TAPE 3M VHB .040 THK 3/4 WIDE CLR 5 ft.
10-8002-C11998 INSTALLATION MANUAL, S281 S/C REAR WING 1
10-8002-C11930 PAINT PROCEDURE, SALEEN ABS PLASTIC BODY KITS 1
10-8003-C11593 (Box) New wing w/logo 1