Filter
Top Products
Disconnecting the Unit:
1. Disconnect the unit from the power
supply.
2. Remove the unit from the supporting
stand.
3. Disconnect optional GPS antenna if
installed.
4. Disconnect A/V connectors.
5. Disconnect any other accessories
attached to the unit.
Cleaning the Unit:
1. Use a soft, dry cloth to wipe away dirt.
2. If the dirt cannot be wiped away,
dampen the cloth with water and a mild
detergent to clean the unit.
3. Use a dry cloth to wipe away residual
moisture when done.
NOTE: Do not use solvent, car cleaner or
organic cleaners to clean the unit. These
substances will damage the its casing.
Cleaning the LCD Display:
1. Turn off the system while cleaning the
display to prevent static electricity.
2. Use a soft, dry cloth to wipe away dirt.
3. The display surface is easily scratched,
do not use hard objects to scrap or
come in contact with the display
surface.
Changing the Adapter Fuse:
The fuse is located in the tip of your
vmax361 car adapter. It may need to be
changed from time to time. To do this,
simply unscrew the black, round end piece,
pull out the old fuse, and replace it with a
new one. Then screw the tip back on again.
USE ONLY: AGC/3AG 2 Amp, hi-breaking,
1500 A-rated fuses.
• 23 •
ROADMAX vmax361 Owner’s Manual v1.1
MAINTAINING YOUR vmax361
om - roadmax vmax361 - 5x5 version.qxp 9/25/2006 3:33 PM Page 23