Ricoh R3111x Series Radar Detector User Manual


 
R3111x SERIES
LOW VOLTAGE DETECTOR
NO.EA-056-080131
1
OUTLINE
The R3111x series are CMOS-based voltage detector ICs with high detector threshold accuracy and ultra-low
supply current, which can be operated at an extremely low voltage and is used for system reset as an example.
Each of these ICs consists of a voltage reference unit, a comparator, resistors for detector threshold setting,
an output driver and a hysteresis circuit. The detector threshold is fixed with high accuracy internally and does
not require any adjustment.
Three output types, Nch open drain “L” type, Nch open drain “H” type and CMOS type are available.
The R3111x Series are operable at a lower voltage than that for the Rx5VL series, and can be driven by a
single battery.
Six types of packages, TO-92, SOT-89, SOT-23-3, SOT-23-5, SC-82AB, and SON1612-6 are available.
FEATURES
Supply Current ......................................................................Typ. 0.8µA (VDET=1.5V, VDD=−VDET0.1V)
Range of Operating Voltage Range......................................0.7V to 10.0V (T
opt=25°C)
Detector Threshold Range....................................................0.9V to 6.0V
Accuracy Detector Threshold................................................±2.0%
Temperature-Drift Coefficient of Detector Threshold ............Typ. ±100ppm/°C
Output Types.........................................................................Nch Open Drain “L”, Nch Open Drain “H”, and
CMOS
Packages ..............................................................................TO-92, SOT-89, SOT-23-3, SOT-23-5,
SC-82AB, SON1612-6
APPLICATIONS
CPU and Logic Circuit Reset
Battery Checker
Window Comparator
Wave Shaping Circuit
Battery Back-up Circuit
Power Failure Detector