Filter
Top Products
OVERVIEW
5
1.4.2 Software and Hardware Installation
IMPORTANT: If you are installing your FireStudio and Monitor Station Remote
concurrently, do not use the FireStudio Installation Drivers Disc v1.0.1
. Otherwise,
completely uninstall the prior installation and use only the FireStudio Control Console
software installed with your Monitor Station Remote Installation Disc via the steps below.
Before connecting your Monitor Station Remote to your FireStudio, insert the Monitor
Station Remote Installation Disc into your computer and follow these instructions to install
updated FireStudio drivers and software:
Windows Software Installation
1) Browse the disc and run ”FireStudio_MSR_Installer
.exe
”.
2) Run “Firmware Updater” from the Start Menu folder,
PreSonus Drivers
.
Macintosh Software Installation
1) Browse the disc and run “FireStudio Installer.pkg”.
2) Run “FireStudio Firmware Updater” from the
Applications
folder.
Hardware Installation
3) Connect one end of the supplied Ethernet cable to the
Remote Control Input
connection on your FireStudio’s rear panel.
4) Connect the other end of the supplied Ethernet cable to the
Remote
input connection
on your Monitor Station Remote’s rear panel.
The lights on the Monitor Station
Remote should flash during this step.
5)
See “3 Sample Hookup Diagrams” for help with speaker connections.