Filter
Top Products
MONITOR MODES
17
Surround Control
Press the Surround Control buttons on the Monitor Station Remote to activate or deactivate
the corresponding Surround speaker output when in Surround Mode:
• [L] (Left front)
Daw 1 output stream.
Corresponds to general purpose output 1 and Main Out L
(1.4.3)
• [C] (Center front) Daw 5 output stream.
Corresponds to general purpose output 5.
• [R] (Right front)
Daw 2 output stream
Corresponds to general purpose output 2 and Main Out R
(1.4.3).
• [Ls] (Left surround)
Daw 3 output stream.
Corresponds to general purpose output 3
• [SUB/LFE] (Subwoofer/Low Frequency Effects)
Daw 6 output stream.
Corresponds to general purpose output 6.
• [Rs] (Right surround)
Daw 4 output stream.
Corresponds to general purpose output 4.
The Main Level control knob on the Monitor Station Remote controls the volume level of all
active Surround outputs equally when the FireStudio is in Surround mode.