Polaris RANGER 4X4 Offroad Vehicle User Manual


 
87
MAINTENANCE AND LUBRICATION
Seat Belts
Inspect al l three seat belts for proper operation before each use of the
vehicle.
1. Push the latch plate i nto the buckle until it clicks. The latch plate
must slide smoothly into the buckle. A click indicates that it’s
securely latched.
2. Push the red button in the middle of the buckle to make sure it
releases freely.
3. Check the belt webbing fo r wear, cuts o r damage. If any
irregularities are found, have the seat belt system checked and/or
replaced by an authorized Polaris dealer.
The RANGER s eat belt is adjustable and
should be adjusted for both the operator
and passenger before driving. Although
having the belt at 30° i s typical for many
people, it will not accommodate all body
sizes and shapes. Make sure the seat belt
is adjusted to the low est possible lap
position before riding.
1. To adjust, loosen the bolts (1).
2. Reposition both the buckle and
retractor. Tighten the bolts.
NOTE: The c enter belt does not s elf
adjust. Before riding, pull on the
strap to secure the belt on the lap
of the center pas senger.
WARNING
Failure to follow the age recommendations for this vehicle could
result in serious injury or death. No one under t he age of 16 may
operate this vehicle. No one under the age of 5 may ride as a
passenger in this vehicle.
1