Filter
Top Products
85
MAINTENANCE AND LUBRICATION
Brakes
Brake Inspection
5. Check the brake system for fluid
leaks.
6. Check the brake pedal for excessive
travel or a s pongy feel.
7. Check the friction pads for wear ,
damage and looseness.
8. Inspect the brake disc spline and
pad wear surface for e xcessive
wear.
9. Change pads when worn to 3/64″
(.1 c m).
Parking Brake Inspection
1. Slowly push the parking brake
down with your foot.
2. After 8 to 12 clicks of lever
travel, c heck the vehicle for
movement. The vehicle should
not roll while parked. If the
vehicle moves, adjustment is
necessary
Parking Brake Adjustment
1. Position the vehicle on a level surface.
2. Place the transmission in neutral.
3. Loosen or tighten the nuts on each
end o f the p arking b rake cable as
needed.
3/64″ (.1 cm)
1