Filter
Top Products
89
Chapter 4
Utilizing Various Information
5 After entering a group name, select “OK” and click the OK button.
The data of the registered location is stored in the entered group, and a map of your sur-
roundings appears.
➲ If there is little or no space in the PC card or you have already stored 300 locations in a
group, a message, “Memory is full”, or “You cannot store more than 300 items in the
same group” appears. To remedy, delete unnecessary data, or create a new group.
■Loading data from a PC card
Address Book data stored in a PC card is loaded to the Navigation System. (However, if there
is no data of Registered Locations in the PC card, you cannot use this function.)
1 Select “Settings” in the Main menu, then select “PC Card ” and “Read from PC Card”.
Click the OK button.
The list of groups to be stored appears.
2 Select the desired group and click the OK button.
The list of locations stored in the group appears.
3 Select the desired locations and click the OK button.
Selected items are checked. To load the data from other locations, repeat this step.
Alternative option:
4 Select “OK” and click the OK button.
After the data of the selected locations is stored in the Address Book, a map of your sur-
roundings appears.
➲ If the total number of data items loaded from a PC card and data items registered in the
Address Book exceeds 300, a message indicating that no more data can be registered
appears. In that case, delete unnecessary data or decrease the number of data items
loaded from a PC card.
Select All : All the locations are selected at once.