Filter
Top Products
Northstar M121/M84 Installation and Operation Manual96
20-7 Installation: Northstar petrol/gasoline sensors
Fit the optional petrol/gasoline fuel kit following
the instructions supplied with the kit.
Note:
SmartCraft engines have fuel flow sensors,
therefore Northstar fuel sensors are not
required as well.
For dual engines, fit two kits.
Wire the Instrument for auto power (see
section 20-4).
Fuel sensor cable
White
During setup:
a) set the fuel data (see section 19-6)
Connect the transducer to the blue Instrument
connector; tighten the locking collar.
During setup
a) set Sonar to
(see section 19-1)
b) set up the sonar options (see section 19-3)
Sonar cable
Blue
20-6 Installation: Sonar transducer
!
WARNING
Do not install plastic through hull
transducers in solid wooden hulls. Leakage
through the hull may result.
Do not install bronze transducers in metal
hulls. This will cause electrolytic corrosion
that may result in damage to the hull or
transducer.