Filter
Top Products
MCC 3100 configuration
26
Figure 2: System Settings
Note: If the Main screen appears, then your basic settings are
already configured, and you can start using the application.
3. In the Username field, enter the user name provided by your system
administrator.
4. In the Password field, enter the password provided by your system
administrator.
5. In the Primary MCG3100 Address field, enter the IP address or Fully
Qualified Domain Name (FQDN) and port of the MCG 3100 provided
by your system administrator, using the format <http or https>:<IP
address or FQDN>:<port>.
For example, http:47.11.210.11:8080 or
http:mcg3100.nortel.com:8080.
6. In the Outgoing Call Service DN field, enter the Outgoing Call
Service DN number provided by your system administrator.
7. From the menu, select Save.
8. From the menu, select Preferences.
The Preferences screen appears. See “Preferences” on page 27.