Filter
Top Products
Please Give Part No., Description and Unit Serial No.
HIGHWAY EQUIPMENT COMPANY
39
97373-A
Page Rev. B
LUBRICATION & MAINTENANCE CONTINUED
#4 CONVEYOR BELT
Standard belt for the #4 chain has a nylon fabric that is impervious to moisture, weathering or normal
action except oil.
• Inspect belt fastener occasionally for wear or "raveling" of belt grip area.
• Make sure belt connecting pin is positioned correctly as shown in Figure 10.
Figure 10 – Conveyor Belt Pin Installation
#5 CONVEYOR BELT
Maintenance
The conveyor belt should be checked daily for proper tension and tracking. See Adjustment section.
Do not be alarmed as sides of belt wear unless belt is out of track. The belt will continue to operate
satisfactorily with up to 1” total worn from the sides. Inspect belt lacing frequently for wear or
“raveling” of belt grip area and loosening hardware. Retighten loose nuts and peen end of lacing screw
into slot of nut as required.
BOTH PIN ENDS MUST
BE BENT DOWN &
TIGHT AGAINST ENDS
OF LACING
IMPORTANT!
Pin must not rotate. If pin
ends are not bent down and
tight against lacing, the ends
may cut into the chain shield
sealers or belt wipers.