Filter
Top Products
Please Give Part No., Description and Unit Serial No.
HIGHWAY EQUIPMENT COMPANY
11
97373-A
Page Rev. A
GENERAL SAFETY RULES
Operation Section
8. Be careful in getting on and off this unit, especially in
wet, icy, snowy or muddy conditions. Clean mud,
snow or ice from steps and footwear.
9. Do not allow anyone to ride on any part of unit for
any reason.
10. Keep away from spinners while they are turning:
a. Serious injury can occur if spinners touch you.
b. Rocks, scrap metal or other material can be
thrown off the spinner violently. Stay out of
discharge area.
11. Inspect spinner fins, spinner frame mounting and
spinner fin nuts and screws every day. Look for
missing fasteners, looseness, wear and cracks.
Replace immediately if required. Use only new SAE
grade 5 or grade 8 screws and new self-locking
nuts.
12. Inspect all bolts, screws, fasteners, keys, chain
drives, body mountings and other attachments
periodically. Replace any missing or damaged parts
with proper specification items. Tighten all bolts,
nuts and screws to specified torques according to
the torque chart in this manual.
13. Shut off engine before filling fuel and oil tanks. Do
not allow overflow. Wipe up all spills. Do not
smoke. Stay away from open flame. FIRE
HAZARD!