Filter
Top Products
Assembling the M-Nav Screw-Mount
1 Choose a position on the dashboard where the M-Nav will be clearly visible
to the driver, and ensure that the mounting surface is clean and dry.
2 Remove the protective layer from the tape and press down firmly for 30 seconds.
3 Press the suction-cup firmly against the surface and press the lever down.
4 Use the baseplate and screws supplied to fix the M-Nav base into the dashboard.
5 Slip the locking-nut over the ballfoot, with the flat side facing upwards.
6 Snap the socket-clip onto the ballfoot.
7 Screw the locking-nut onto the thread of the socket-clip until firm.
3.3 Panavise Screw-Mount
The Panavise mounting system mounts similarly to the M-Nav Screw-Mount described in Section 3.2,
from point 4 onwards.
3. Positioning the M-Nav in a Vehicle
M-Nav 650 || User Manual 11
3. Positioning the M-Nav in a Vehicle