Filter
Top Products
69
iCN 500 Series | User Manual
19. Installing a Language on
Your iCN
Your iCN contains English language files by default. The following procedure will replace English on your
iCN with another language. Only complete this procedure if you want to install a language other than
English.
Prerequisites
You must have these programs installed on your computer:
• Smart
Desktop (in the language that you require), and
• Microsoft ActiveSync 3.7.1 (or higher).
If you do not have both programs installed, install them now by completing Installing Smart
Desktop on Your Computer
on page 63.
Note: If you already have Smart Desktop installed, but in a language other than the one you want
to install on your iCN, you must first uninstall Smart
Desktop (see Uninstalling Smart Desktop
on
page 65), then reinstall Smart Desktop in the correct language. For example, if you want to
install French on your iCN, you must have Smart
Desktop installed on your computer in French.
Step One: Remove Smart From Your iCN
1. Plug the small end of the USB cable into the USB Socket on the bottom of your iCN and the
other end into your computer USB socket.
Microsoft ActiveSync will open and synchronize with your iCN.
2. In Microsoft ActiveSync, click
.
Windows Explorer will open, displaying the contents of the iCN.
3. In Windows Explorer, select the Program Files folder and delete it.
• If you are asked for confirmation, click Yes
.
4. In Windows Explorer, open the My Flash Disk folder.
The contents of My Flash Disk will display.
5. Select all files and folders in the My Flash Disk folder and delete them.
• If you are asked for confirmation, click Yes
.
6. Close Windows Explorer.
7. Use the stylus to switch the Battery Switch on the back of the iCN to OFF.
8. Wait five seconds, then switch the Battery Switch to ON
.
The iCN will turn on and display the blue USB screen. Microsoft ActiveSync will
resynchronize with your iCN