Filter
Top Products
15
iCN 500 Series | User Manual
Getting started
5. Starting Your iCN
The Main Menu screen provides access to all of the iCN’s functions, including navigating to a destination.
Step One: Turn iCN On
1. Check the Battery Switch on the back of the iCN. If it is switched to OFF, then remove the
stylus and use it to switch the Battery Switch to ON
.
2. Gently pull the bottom of the GPS receiver away from the iCN.
The receiver will lift out to a horizontal position to allow it to obtain a GPS fix.
3. Press
.
The iCN will turn on.
Step Two: Warning Screen
1. Read the warning message.
2. Tap Accept to confirm that you understand.
The first Tutorial screen will display.
Step Three: Tutorial Screens
1. Read the Tutorial screen.
• To prevent the Tutorial from displaying on startup, select the Do not show Tutorial on
startup check box.
2. Tap
to move through each Tutorial screen.
The Main Menu screen will display.