Navman iCN 520 GPS Receiver User Manual


 
6
a b
7
a b
8
5
a b
Click
13
iCN 500 Series | User Manual
Getting started
5. Insert the iCN into the suction-mount:
a. Position the two locating-tabs on the underside of the iCN into the corresponding slots
on the socket-clip.
b. Snap the upper side of the iCN into the socket-clip.
6. Use the alcohol swab to clean and dry the suction-cup and the mounting-area on the
windshield, then attach the suction-mount to the windshield:
a. Hold the suction-cup firmly against the windshield and
b. Press the lever towards the suction-cup.
7. Connect the iCN to the vehicle power supply:
a. Plug the small end of the In-Vehicle Power-Adaptor into the Power Socket on the left side
of the iCN.
b. Plug the other end of the In-Vehicle Power-Adaptor into the 12 V vehicle power-socket.
8. Press
.
The iCN will turn on.