Filter
Top Products
67
iCN 500 series | User Manual
Map Preferences — Display Settings
1. From the Main Menu, tap Preferences.
2. From the Preferences screen, tap Maps.
3. From the Maps screen, tap Display.
The first of two Display screens will display. Press
to move through the Display screens.
Figure 1: iCN 510 Figure 2: iCN 520
4. Complete the following:
If you want to... Then...
enable Auto Zoom during navigation select the Auto Zoom check box. If
selected, the 2D Map and 3D Map
screen will automatically zoom in or out,
depending on your speed, to allow optimal
route-viewing.
enable access to the Next Turn screen
select the Display Next Turn screen
check box.
enable access to the Next 4 Turns screen
select the Display Next 4 Turns screen
check box.
change the colour scheme select your preferred scheme from the
Map colour schem
e box by tapping the
left or right arrows or using the left and
right sides of the 4-way toggle
.
improve screen contrast in light or dark
conditions
under Map colours, select either Day
or Night
.
iCN 520 only: If Night is selected, the
Night Keypad Lighting checkbox will be
enabled.
iCN 520 only: turn on the keypad backlight
when the iCN is using external power
Note: This option is only available when
Map colours
is set to Night.
select the Night Keypad Lighting
check box.
display topographical information on the
2D Map and 3D Map screens
select the Topographic display
check box.