Navman iCN 500 series GPS Receiver User Manual


 
56
iCN 500 series | User Manual
13. Avoiding an Area
You can calculate a route that avoids a specified area on the map. Up to ten Avoid Areas can be added.
Avoid Areas are displayed as shaded areas. If no alternative route around an Avoid Area exists, you will
be routed through an Avoid Area.
Adding an Avoid Area
1. From the Main Menu screen, tap Map.
The 2D Map screen will display.
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
3. Use the stylus or 4-way toggle to position the intersection of the cross-hairs to the area
that you want to avoid.
4. Tap the intersection of the cross-hairs, or press the 4-way toggle button to display the
Pop-up menu.
5. Select Add Avoid Area.
An Avoid Area is displayed.
6. Set the Avoid Area to the correct size and position using the 4-way toggle
.
7. Tap the Avoid Area or press the 4-way toggle to enable the Avoid Area.
Deleting an Avoid Area
1. From the Main Menu screen, select Map.
The 2D Map screen will display.
2. Tap the Map screen and move the cross-hairs over the Avoid Area that you want to delete.
3. Tap the intersection of the cross-hairs, or press the 4-way toggle button to display the
Pop-up menu.
4. Select Delete Avoid Area.
The Avoid Area is deleted.
Deleting All Avoid Areas
1. From the Main Menu screen, tap Preferences.
2. From the Preferences
screen, tap My Data.
The My Data screen will display.
3. From the My Data screen, tap Clear Data.
The Clear Data screen will display.
4.
Select Clear Avoid Areas. When the warning dialog-box opens, select Yes.
5.
To return to the Main Menu, press .