Filter
Top Products
57
iCN 500 series | User Manual
14. Route Demonstrator
The Route Demonstrator allows you to:
• Preview a route.
•
Plan and view a route without a GPS fix, such as when you are inside a building.
Step One: Activate Route Demonstrator
1. From the Main Menu screen, tap Preferences.
2. From the Preferences screen, tap Routing.
The Routing screen will display.
3. Press
twice.
4. Select the Demonstrate Route check box.
5. Tap Save.
The Main Menu screen will display.
Step Two: Select Departure Point
If you have a GPS fix, you do not need to select a departure point unless you want the
demonstrated route to start elsewhere.
1. From the Main Menu screen, tap Map.
The 2D Map screen will display.
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
3. Position the intersection of the cross-hairs on your departure point. Where the cross-
hairs intersects on a street, the street will highlight and the street name will display.
4. Tap the intersection of the cross-hairs, or press the 4-way toggle button.
The Pop-up menu will display.
3. Select Set as Start Location.
The Pop-up menu will close.
Step Three: Select Destination Point
Set a destination either by using the Destination screen (see pages 21-37) or by using the
2D Map screen Pop-up menu by completing the following:
2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
2. Position the intersection of the cross-hairs on your destination point. Where the cross-
hairs intersects on a street, the street will highlight and the street name will display.
3. Tap the intersection of the cross-hairs, or press the 4-way toggle button.
The Pop-up menu will display.
4. Select Navigate To.
The Pop-up menu will close. The 3D Map screen will display the calculated route in
Route Demonstrator mode.
• If you have selected the Repeat check box on the Routing preferences screen, the
Route Demonstrator will continue to repeat the route.