Filter
Top Products
19
iCN 500 series | User Manual
Getting started
iCN 520
The memory card that came with your iCN 520 contains a selection of languages. As long as this
memory card is inserted in your iCN (and you have not selected the Do not show on startup
check box on the Language screen), you will be able to navigate using any of these languages by
selecting one at the Language screen at startup.
The iCN 520 can store two languages in internal memory: UK English and one which you have
installed using the below procedure. This means that if you are using a different memory card to the
one supplied with your iCN, you can navigate using either UK English or your chosen language by
selecting one at the Preferences - Language screen (see page 66).
Installing a Language to your iCN 520
To install a language on your iCN, the Language screen must be enabled to display at startup.
If you have disabled the Language screen from displaying at startup, or you purchased your
iCN 520 in Australia, Canada, New Zealand or United States, you must ensure the Language
Selection Screen check box is selected on the Preferences - Startup screen. See page 77.
1. Turn on your iCN as per Step One of Starting Your iCN on page 14.
• If your iCN is already on, reset it as per the instructions on page 17.
2. When the Language screen is displayed, tap your language choice.
3. Select the Do not show on startup check box.
4. Tap
.
The selected language is installed to your iCN. The Warning screen will display.
5. Continue to Step Three of Starting Your iCN on page 15.