Navman 11 GPS Receiver User Manual


 
27
MN002000A © 2004 Navman NZ Ltd. All rights reserved. Proprietary information and specifications subject to change without notice.
Message ID: 1130
Rate: Variable
Message Length: 21 words
Word No. Name Type Units Range
1-4 Message header
5 Header checksum
6-7 Set time (Note 1) UDI 10 ms ticks 0 to 4 294 967 295
8 Sequence number (Note 2) I 0 to 32 767
Port 1 communication parameters (9.0-11)
9 Port 1 character width Bit
0 = 7 bits
1 = 8 bits
10 Port 1 stop bits Bit
0 = 1
1 = 2
11 Port 1 parity Bit
0 = no parity
1 = odd parity
2 = even parity
12 Port 1 bps rate (Note 3) Bit
0 = custom
1 = 300
2 = 600
3 = 1200
4 = 2400
5 = 4800
6 = 9600
7 = 19 200
8 = 38 400
9 = 57 600
10 = 76 800
11 = 115 200
13 Port 1 pre-scale (Note 3) UI 0 to 255
14 Port 1 post-scale (Note 3) UI 0 to 7
Table 3-17 (1 of 2) Message 1130 (serial port communication parameters in use)
3.5.1.13 Message 1130 (serial port communication
parameters in use).
This message contains the communication
parameters for the receiver’s two serial ports.
The contents of the ‘serial port communication
parameters in use’ message are described in
Table 3-17.