Filter
Top Products
User’s manual NAVIGON 13xx | 23xx
Navigation - 47 -
5.6.3 Map in Navigation mode
After the route was shown in Preview mode, navigation was started.
The map opens in Navigation mode.
1 Here is shown what signposts should be followed.
2 Here you can see any speed limits, warning signs or prohibiting signs.
3 The route is highlighted in orange.
4 When two manoeuvres need to be executed in quick succession, the
small arrow box indicates the second manoeuvre to be executed.
5 The large arrow box shows a diagram of the next junction which you
should turn on to. The distance remaining to this junction is indicated
underneath.
As you get closer to the junction you will see a spot diagram in addition
to the distance:
The nearer you get to the junction, the more yellow spots are displayed.
If you don't have to change direction for a long time, you will see only a
straight arrow. The distance you must continue straight on is indicated
underneath the arrow.
► Tap on the large arrow box to hear current route instructions.
6 (Only NAVIGON 23xx): The Traffic Information box opens if a
reported traffic obstruction affects your route.
If a distance is indicated in the Traffic Information box, no detour route
was calculated yet for the traffic obstruction in question.
► Tap on the Traffic Information box in order to open the
P
REVIEW TMC window. It shows a map view with the route section
affected by the message and a possible detour.