Navigon 13xx GPS Receiver User Manual


 
User’s manual NAVIGON 13xx | 23xx
Navigation - 26 -
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 34. Please read on there.
Note: It is not necessary to enter all the address details. You can tap on
Navigation
before you get that far.
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify only the town and street without specifying a house
number or cross street, the navigation system will calculate the best
route to this street.
5.2.3 Enter Coordinates
You can also enter the geographic coordinates of your destination. The
coordinates can be entered as decimal degrees or in degrees, minutes
and seconds.
1. Tap in the N
AVIGATION window on New Destination > Enter an
Address.
The A
DDRESS window opens.
2. Tap in the A
DDRESS window on Options > Enter Coordinates.
The E
NTER COORDINATES window opens.
Entering as a decimal number
3. Enter the degree of latitude.
Begin the entry with a minus sign if you want to enter a southern
degree of latitude.
4. Enter the degree of longitude.
Begin the entry with a minus sign if you want to enter a western
degree of longitude.
Entering with minutes / seconds
3. Enter the degree of latitude.
Use the corresponding buttons shown on the keyboard in order to
enter the units:
(degrees), (minutes), (seconds).
The (N S) button alongside the entry box indicates whether it is a
northern or southern degree of latitude.
Tap on the button if you want to change the current setting.
4. Enter the degree of longitude.
Use the corresponding buttons shown on the keyboard in order to
enter the units: