Filter
Top Products
Issue: August 18 2004 Page 17
14.5 SETTINGS MENU.
The settings menu gives access to several sub-menus.
The current setting of each is always shown at the bottom of the display.
14.5.1 INPUT FILTER.
Two possibilities are available: “FLAT” or “LOW CUT”.
14.5.2 ALC.
From this sub-menu, the “ALC” can be switched “ON” or “OFF”.
It is highly recommended to switch on the “LOW CUT” filter if “ALC” is
turned ON.
14.5.3 ALC THRESHOLD.
The “THRESHOLD” can be adjusted from –104 dB to –74 dB.
In this case the “+”key (8) and the “-“key (7) are disabled. If “USING +/-
KEYS” is selected, the “+”key (8) and “-“key (7) are enabled during
“STOP” and “RECORD” mode, which allows the “THRESHOLD” level to
be adjusted without returning in the “SETTINGS” menu.
INPUT FILTER
FLAT
LOW CUT
FLAT
ALC
ON
OFF
ON
ALC THRESHOLD
-74 DB
USING +/- KEYS
USING +/- KEYS
SETTINGS
INPUT FILTER
ALC
ALC THRESHOLD
ON
SETTINGS
ALC
ALC THRESHOLD
ALC SPEED
USING +/- KEYS
SETTINGS
ALC THRESHOLD
ALC SPEED
BEEP
NORMAL
SETTINGS
ALC SPEED
BEEP
COMPRESSION
ON
SETTINGS
BEEP
COMPRESSION
BACKLIGHT
MPEG 128/48
SETTINGS
COMPRESSION
BACKLIGHT
OUTPUT LEVEL
AUTOMATIC