Filter
Top Products
Issue: August 18 2004 Page 14
To delete one or more takes, select in the directory the lowest take number that needs to be deleted,
press the “CENTER” button (13) and select the “TAKE ERASURE” menu. Once the selection
confirmed by pressing the “CENTER” button (13), the erasing starts.
To escape from the sub-menu, press the “LEFT” (10) or “RIGHT” (12) key once.
NOTE: Erasing individual takes in the middle of the “DIRECTORY” is not possible. The erase feature
will always erase from the selected take to the end of the card.
14.1.6 DELETE, ARES-P II ONLY.
Any take from the directory can be deleted without influencing other takes.
14.1.7 DELETE TO END, ARES-P II ONLY.
Erase the selected take and all takes after until the end of the card.
14.1.8 RENUMBER, ARES-P II ONLY.
Permits after deleting file(s) to renumber the files from the selected file until the end of the card.
14.1.9 RENUMBER ALL, ARES-P II ONLY.
Permits after deleting file(s) to renumber all the files from file 1 until the end of the card.
14.2 LOUDSPEAKER, ARES-P II ONLY.
This switches “ON” or “OFF” the internal loudspeaker.
NOTE: The internal loudspeaker can only be used in the playback
mode.
14.3 TOOLS.
several sub-menus are available.
14.3.1 DATE AND TIME.
Selecting “DATE & TIME” gives access to change the time and date of the real time clock. Once the
“CENTER” button (13) is pressed, the first digit starts blinking. The number can be modified by
pushing the “UP” or “DOWN” (9 or 11) keys. Pressing the “RIGHT” arrow key (12) jumps to the next
digit. Once the last number is introduced, the clock starts running. (Hours, Hours, Minutes, Minutes,
Seconds, Seconds)
Introducing the date uses the same procedure.
Once the last number is introduced, the date is memorized.
To escape from the sub-menu, press the “LEFT” (10) or “RIGHT” (12) key once.
DATE & TIME
12 : 30 : 00
7 : 05 : 00
DATE & TIME
HH:MM:SS
7 : 05 : 00
H
TOOLS
DATE & TIME
CARD FORMATTING
FORMAT REPAIRING
TOOLS
FORMAT REPAIRING
PROGRAM SELECT
VERSION
LOUDSPEAKER
OFF
ON
ON