Filter
Top Products
Issue: August 18 2004 Page 16
14.3.6 VERSION.
Selecting the “VERSION” sub-menu shows the serial number of the
recorder as well as current version of the software installed. The version
shown in this picture corresponds to the version for the “FAT” mode.
Turning on the machine in the “NFS” mode will show the “NFS” version.
To escape from the sub-menu, press the “LEFT” key (10) once.
14.4 TEMPLATES FOR ARES-P II.
Only the Ares-P II can store and recall 4 different templates.
To have an overview of the different sub-menu settings that can be
stored, refer to the menu tree at the end of this
manual. Only menu settings with a red square
against it can be stored.
To use a template, setup the machine as required, then go to
“TEMPLATES”, select “STORE 1” and press the execute key (13). The message “DONE” will appear.
If now any changes were made in the setup, you can go to “RECALL 1” and press the execute key
once again. This returns the machine to the settings stored in template 1.
TEMPLATES
RECALL 4
STORE 1
STORE 2
ON
XXX
ARES-P II
S/N : 123456789
SOFT (FAT): Vx.xx
AUDIO BOARD: 2
SOFTWARE OPTIONS:
#1 #2