Filter
Top Products
BASIC BRAKE SYSTEM -
Rear Drum Brake
35A-27
DISASSEMBLY AND REASSEMBLY
35100770097
1
2
3
4
5
6
Grease: Repair kit grease
Brake fluid: DOT3 or DOT4
Wheel cylinder repair kit
3
6
1
2
3
34
4
6
1
4
Grease
Disassembly steps
1. Boots
2. Piston assembly
"
A
A
3. Pistons
"
A
A
4. Piston cups
5. Spring
6. Wheel cylinder body
REASSEMBLY SERVICE POINT
"
A
A
PISTON CUP/PISTON REASSEMBLY
1. Use alcohol or specified brake fluid to clean the wheel
cylinder and the piston.
2. Apply the specified brake fluid to the piston cups and
the special tool.
Specified brake fluid: DOT3 or DOT4
3. Set the piston cup on the special tool with the lip of the
cup facing up, fit the cup onto the special tool, and then
slide it down the outside of the tool into the piston groove.
Caution
In order to keep the piston cup from becoming twisted
or slanted, slide the piston cup down the tool slowly
and carefully, without stopping.
MB990619
Piston
Have the lip facing
upwards.