Filter
Top Products
BASIC BRAKE SYSTEM -
Disc Brake
35A-19
DISC BRAKE
35100800017
REMOVAL AND INSTALLATION
Pre-removal Operation
Brake Fluid Draining
Post-installation Operation
D Brake Fluid Supplying
D Brake Line Bleeding (Refer to P.35A-10.)
29 Nm
90 - 110 Nm
1
2
3
4
55 - 65 Nm
<Front>
<Rear>
29 Nm
2
1
3
4
Removal steps
1. Brake hose connection
2. Gasket
"
A
A
3. Disc brake assembly
4. Brake disc
INSTALLATION SERVICE POIINT
"
A
A
DISC BRAKE ASSEMBLY INSTALLATION
1. In order to measure the brake drag torque after pad
installtion, measure the rotary-sliding resistance of th e
hub by the following procedure with the pads removed.
<Front>
(1) Remove the drive shaft.
(Refer to GROUP 26 - Front Axle.)
MB990998
Bolt
Tighten the nut with
the bolt secured.