Mitsubishi 35A Automobile User Manual


 
ABS <2WD> -
Wheel Speed Sensor
35B-28
WHEEL SPEED SENSOR
35200830279
REMOVAL AND INSTALLATION
Post-installation Operation
Wheel Speed Sensor Output Voltage Check
(Refer to P.35B-19.)
<Front> <Rear>
1
2
4
3
Front speed sensor removal steps
D
Splash Shield Removal (Refer to
GROUP 42 - Fender.)
A
A
""
A
A
1. Front speed sensor
2. Front ABS rotor (Refer to GROUP
26 - Drive Shaft.)
Rear speed sensor removal steps
A
A
""
A
A
3. Rear speed sensor
4. Rear ABS rotor (Refer to GROUP
27 - Rear Axle Hub.)
NOTE
The front rotor is integrated with the drive shaft and is not
disassembled.
REMOVAL SERVICE POINT
A
A
"
FRONT SPEED SENSOR/REAR SPEED SENSOR
REMOVAL
Caution
Be careful when handling the pole piece at the tip of
the speed sensor and the toothed edge of the rotor so
as not to damage them by striking against other parts.