Mitsubishi 35A Automobile User Manual


 
BASIC BRAKE SYSTEM -
Rear Drum Brake/Proportioning Valve
35A-28
INSPECTION
35100780038
Check the piston and wheel cylinder walls for rust or damage,
and if there is any abnormality, replace the entire wheel cylinder
assembly.
PROPORTIONING VALVE
35100570154
REMOVAL AND INSTALLATION
Pre-removal Operation
Brake Fluid Draining
Post-installation Operation
D
Brake Fluid Supplying
D
Brake Line Bleeding (Refer to P.35A-10.)
Flared brake line nuts
15 Nm
1
1
2
1
Removal steps
"
A
A
1. Brake pipe
2. Proportioning valve
INSTALLATION SERVICE POINT
"
A
A
BRAKE PIPE CONNECTION
Connect the pipes to the hydraulic unit as shown in the
illustration.
1. Proportioning valve Rear brake (L.H.)
2. Proportioning valve Rear brake (R.H.)
3. Proportioning valve Front brake (R.H.)
4. Proportioning valve Front brake (L.H.)
5. Proportioning valve Master cylinder (secondary)
6. Proportioning valve Master cylinder (primary)
12
3
4
5
6