Filter
Top Products
ABS <2WD> -
General Information
35B-3
GENERAL INFORMATION
35200010222
The ABS consists of components such as the wheel
speed sensors, stop lamp switch, hydraulic unit
assembly, ABS control unit (ABS-ECU) and the
ABS warning lamp. If a problem occurs in the
system, the malfunctioning components can b e
identified and the trouble symptoms will be
memorized by the diagnosis function.
In addition, reading of diagnosis codes and service
data and actuator testing are possible by using
the MUT-II.
Items Specifications
Master cylinder Type Tandem type (with level sensor)
I.D. mm 25.4
Brake booster Type Vacuum type, tandem
Effective dia. of power cylinder mm 180 + 205
Boosting ratio 6.5
Proportioning valve Type Dual type
Decompression ratio 0.25
Front brakes Type Floating caliper, 1-piston, ventilated disc
Disc effective dia.
´
thickness mm 256
¢
24
Wheel cylinder I.D. mm 60.3
Pad thickness mm 10.0
Clearance adjustment Automatic
Rear drum brakes Type Leading trailing
Drum I.D. mm 203
Wheel cylinder I.D. mm 20.6
Lining thickness mm 4.4
Clearance adjustment Automatic
Brake fluid DOT3 or DOT4
ABS type 4-sensor, 3-channel method
Speed sensor Magnet coil type on 4 wheels
Front ABS rotor teeth 43
Rear ABS rotor teeth 43