Filter
Top Products
BASIC BRAKE SYSTEM -
Service Specifications/Lubricants/
Sealants/Special Tools
35A-5
Items Standard value Limit
Rear disc brake Pad thickness mm 10.0 2.0
Disc thickness mm 10.0 8.4
Disc runout mm - 0.08
Drag force (tangential force of wheel mounting
bolts) N
69 or less -
Rear drum brake Lining thickness mm 4.4 1.0
Drum inside diameter mm 203 205
LUBRICANTS
35100040082
Items Specified Lubricant
Brake fluid DOT3 or DOT4
Brake piston seal Repair kit grease (orange)
Slide pin boot and slide pin bush inner surfaces
Brake piston boot inner surfaces
Piston boot mounting grooves
Rear brake shoe and backing plate contact surfaces Brake grease SAE J310, NLGI No.1
Shoe assembly and auto adjuster assembly contact
surfaces
Shoe and lever assembly and auto adjuster assembly
contact surfaces
SEALANTS
35100050153
Items Specified sealant Remarks
Thread part fitting 3M ATD Part No. 8661 or equivalent Semi-drying sealant
Vacuum switch
SPECIAL TOOLS
35100060071
Tool Number Name Use
MB990964
MB990520
MB990619
Brake tool set D Pushing-in of the disc brake piston
D Installation of drum brake wheel cylinder
piston cup
MB990998 Front hub remover
and installer
Provisional holding of the wheel bearing