Filter
Top Products
36
MITSUBISHI ELECTRIC
FR-F 740 EC/E1
ACCESSORIES
˾
Noise Filters for FR-F 740-00023 to FR-F 740-01160
FFR-A540-8A-SF100
FR-F 740-00023 – 00052
5 < 30 8 1.5 104741
FFR-A540-16A-SF100
FR-F 740-00083
8 < 30 16 1.5 104752
FFR-A540-30A-SF100
FR-F 740-00126 – 00250
14 < 30 30 1.8 104753
FFR-F740-55A-SF100
FR-F 740-00310 – FR-F740-00380
34 < 30 55 3 157395
FFR-A540-75A-SF100
FR-F 740-00470 – FR-F740-00620
34 < 30 75 4.1 104755
FFR-A540-95A-SF100
FR-F 740-00770
36 < 30 95 6.7 104756
FFR-A540-120A-SF100
FR-F 740-00930
34 < 30 120 9.7 151881
FFR-A540-180A-SF100
FR-F 740-01160
62 < 30 180 10.8 104757
Environment 1 noise filters
The noise filters listed below make it possi
-
ble to comply with the requirements for
Environment 1 (unrestricted distribution)
with shielded motor cables up to 20m long
and the requirements of Environment 1
(restricted distribution) with shielded mo
-
tor cables up to 100m long. This also provi
-
des compliance with the 100A limits for
Environment 2 with shielded cables up to
100m long.
The frequency inverters of the FR-F 740 se
-
ries are fitted with an integrated EMC noise
filter for industrial environments (Environ
-
ment 2). The filters listed here are thus only
necessary for these inverters in special ca
-
ses.
The FN 3359-२२२ filters enable compli
-
ance with the requirements for Environ
-
ment 1 (restricted distribution) with shiel
-
ded motor cables up to 100m long, and
thus also with the requirements for Envi
-
ronment 2 with cables of the same length.
Th FFR-A540-२२२A-SF100 filters are con
-
figured for “footprint” installation, which
means that the base plate of the frequency
inverter is bolted onto the filter unit, so
that the entire assembly can then be bol
-
ted onto the mounting plate in a
switchgear cabinet.
L2
L3
L1
E
L2’
L3’
L1’
E
˾
Noise Filters for FR-F 740-01800 to FR-F 740-12120
FN 3359-180-28
FR-F 740-01800
34 < 6 180 6.5 141097
FN 3359-250-28
FR-F 740-02160
38 < 6 250 7 104663
FN 3359-400-99
FR-F 740-02600 – FR-F740-03610
51 < 6 400 10.5 104664
FN 3359-600-99
FR-F 740-04320 – FR-F740-05470
65 < 6 600 11 104665
FN 3359-1000-99
FR-F 740-06100 – FR-F740-09620
84 < 6 1000 18 104666
FN 3359-1600-99
FR-F 740-10940 – FR-F740-12120
130 < 6 1600 27 130229
Noise filters for highcapacities
The extremely compact line of FN 3359
filters provides the user with an efficient
noise suppression at low room require
-
ments.
The FN 3359 filters are suitable for noise
suppression conforming to EN 61800-3.
The filters are designed to reduce cable-in
-
duced interference to levels that comply
with the Environment 1 and 2 require
-
ments.
“Footprint” installation on the frequency
inverter base plate is not possible with the
FN3359-२२२-28/99 filters. These units
must be installed next to the frequency in
-
verter.
These filters enable compliance with the requirements for Environment 1 (restricted distribution) with shielded motor cables upto 100m
long, and thus also with the requirements of Environment 2 with the same cable lengths.