Mitsubishi Electronics Frequency Inverter Automobile Accessories User Manual


 
13
MITSUBISHI ELECTRIC
FR-F 740 EC/E1
Rated motor
capacity
[kW]
120% overlaod capacity
90 110 132 160 185 220 250 280 315 355 400 450 500 560 630
150% overlaod capacity
75 90 110 132 160 185 220 250 280 315 355 400 450 500 560
Rated
current
[A]
120%
overlaod
capacity
180
(153)
216
(184)
260
(221)
325
(276)
361
(307)
432
(367)
481
(409)
547
(465)
610
(518)
683
(581)
770
(654)
866
(736)
962
(818)
1094
(870)
1212
(1030)
198 238 286 357 397 475 529 602 671 751 847 953 1058 1203 1333
216 259 312 390 433 518 577 656 732 820 924 1039 1154 1313 1454
150%
overlaod
capacity
144
(122)
180
(153)
216
(184)
260
(221)
325
(276)
361
(307)
432
(367)
481
(409)
547
(465)
610
(518)
683
(581)
770
(654)
866
(736)
962
(818)
1094
(870)
173 216 259 312 390 433 518 577 656 732 820 924 1039 1154 1313
216 270 324 390 487 541 648 721 820 915 1024 1155 1299 1443 1641
Output
capacity
[kVA]
120% overlaod capacity
137 165 198 248 275 329 367 417 465 521 587 660 733 834 924
150% overlaod capacity
110 137 165 198 248 275 329 367 417 465 521 587 660 733 834
Overload current
rating
120% overlaod capacity
120% of rated motor capacity for 3s;110% for 1 min.(max.ambient temperature 40°C) – typical for pumps and fans
150% overlaod capacity
150% of rated motor capacity for 3s;120% for 1 min.(max.ambient temperature 50°C) – typical for conveyor belts and centrifuges
Voltage
3-phase AC,0 V to power supply voltage
Frequency range 0.5–400 Hz
Control method V/f control,optimum excitation control or simple magnetic flux vector control
Modulation control Sine evaluated PWM,Soft PWM
Carrier frequency 0.7 kHz–6 kHz (user adjustable)
Power supply voltage 3-phase,380–500 V AC,15% / +10%
Voltage range 323–550 V AC at 50 / 60 Hz
Power supply frequency 50 / 60 Hz ±5%
Rated input
capacity
[kVA]
120% overlaod capacity
137 165 198 248 275 329 367 417 465 520 587 660 733 834 924
150% overlaod capacity
110 137 165 198 248 275 329 367 417 465 520 587 660 733 834
Cooling Fan cooling
Power loss
[kW]
120% overlaod capacity
2.7 3.3 3.96 4.8 5.55 6.6 7.5 8.4 9.45 10.65 12.0 13.5 15.0 16.8 18.9
150% overlaod capacity
2.25 2.7 3.3 3.96 4.8 5.55 6.6 7.5 8.4 9.45 10.65 12.0 13.5 15.0 16.8
Frame size H J K L M N P
Inverter weight [kg] 37 50 57 72 72 110 110 220 220 220 235 235 285 285 285
Reactor weight [kg] 20 22 26 28 29 30 35 38 42 46 50 57 67 85 95
Order no.
158604 158605 158607 158608 158609 158610 158611 158612 158613 158614 158615 158616 158617 158619 158620
SYSTEM DESCRIPTION
Specifications FR-F 740-01800 to -12120
The performance figures at the rated motor capacity are based on a motor voltage of 400 V.
The overload capacity in % is the ratio of the overload current to the inverter’s rated current in the respectiveoperating mode. For repeated duty cycles allow sufficient time for the inverter and the motor to
cool below the temperature reached at 100% load. The waiting periods can becalculated using the r.m.s. current method (I² ×t), for which knowledge of the duty.
The maximum output voltage cannot exceed the power supply voltage. The output voltage can be varied overthe entire power supply voltage range.
The rated input capacity varies depending on the impedance values on the power supply side of theinverter (including the cables and input reactor).
When the load curve with 120% overload capacity is selected the maximum permitted ambient temperature is 40°C.
When operating with carrier frequencies 2.5 kHz this value is reduced automatically as soon as the frequency inverter exceeds the rated output current shown in parentheses (= 85% load).
When the cable bushing for the optional expansion cards is broken out the unit has anIP 00 protection rating.
The suffix EC or E1 in the model designation identifies the CE versions of the frequency inverter (for the European Union). The inverter types FR-F740-02160 and above are all delivered in the E1 versionas
standard (PCBs with two coats of protective varnish). The EC version (varnished PCBs) is standard for types FR-F740 00023 through 01800. The otherversion as always available as an option.
I
rated
I
max.60 s
I
max.3 s
I
rated
I
max.60 s
I
max.3 s