Filter
Top Products
G
Warning!
When turning the wheel wrench to loosen the
wheel bolts, make sure you position your
hands on the wrench in such a way that you
avoid injury to yourself, such as scraping your
hands against the wheel. Make sure turning
the wheel wrench will not scratch or damage
the wheel rim.
!
Do not position the jack on the body of
the vehicle, as this may cause damage to
the vehicle.
Jack support tube cover (except SL 63 AMG,
SL 65 AMG, and vehicles with Sport Package)
Jack support tube cover (SL 63 AMG, SL 65 AMG,
and vehicles with Sport Package only)
X
Open cover ; by pressing at point
indicated by arrow.
or
X
Insert a flat blade screwdriver in the
opening of cover ; and pry it out.
X
Remove cover ;, taking care not to
damage the locking tabs.
X
Insert jack arm ? fully into jack support
tube hole A up to the stop.
G
Warning!
Insert the jack fully into the jack support tube
hole up to the stop. Otherwise, the vehicle
may fall from the jack and cause personal
injury or damage to the vehicle.
X
Keeping jack in this position, turn crank
= clockwise until the jack base meets the
ground. Make sure the jack is vertical.
X
Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the ground.
Removing the wheel
X
Unscrew the uppermost wheel bolt and
remove it.
X
Replace this wheel bolt with alignment
bolt :.
X
Remove the remaining bolts.
Flat tire
279
Practical hints
230_AKB; 6; 22, en-US
d2ureepe, Version: 2.11.8.1
2009-07-28T18:49:58+02:00 - Seite 279
Z