Filter
Top Products
X
Open tensioning clasps A by pulling them
downward.
X
Unhook retainer springs B from holders
and flip retainer springs all the way up.
C
Luggage cover
D
Cloth end
E
Cloth holder
X
Carefully tilt luggage cover C in direction
of arrow towards rear of trunk.
X
Roll up front end of cloth D in the trunk
towards the front and fasten it in place in
front of cloth holder E.
X
Remove luggage cover C from the trunk.
Installing
!
Before installing the luggage cover, make
sure that the cloth end is in front of the
cloth holder. Otherwise, it could be
damaged.
X
Carefully place luggage cover in trunk.
X
Insert luggage cover : into guide rails
= on both sides using hooks ;.
X
Tilt luggage cover : forward in direction
of arrow.
X
Fold retainer springs of tensioning clasps
downward and clip them into holders on
both sides (Y page 159).
X
Close tensioning clasps on both sides by
pressing them upward.
X
Pull handle of luggage cover towards the
rear.
X
Clip eyelets onto side trim panels.
X
Close the zipper completely.
X
Fold back the zipper’s cloth cover across
the entire length of the luggage cover.
Sunshade for panorama roof
The sunshade protects you from excessive
sunlight coming in through the panorama
roof.
G
Warning!
Do not operate the sunshade while driving.
Adjusting the sunshade while driving could
cause the driver to lose control of the vehicle.
160
Retractable hardtop
Controls in detail
230_AKB; 6; 22, en-US
d2ureepe, Version: 2.11.8.1
2009-07-28T18:49:58+02:00 - Seite 160