Filter
Top Products
Placing wiper arms in vertical position
Wiper arms in vertical position
X
Make sure the hood is fully closed.
Vehicles with SmartKey
X
Turn the SmartKey in the starter switch to
position 1.
X
Turn the combination switch to wiper
setting II.
X
With wiper arms in vertical position, turn
the SmartKey in the starter switch to
position 0.
X
Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO
X
Turn off the engine.
With the driver’s door closed, the starter
switch is now in position 1.
X
Turn the combination switch to wiper
setting II.
X
With wiper arms in vertical position, open
the driver’s door.
The starter switch is set to position 0, same
as the SmartKey removed from the starter
switch.
X
Turn the combination switch to wiper
setting 0.
Removing wiper blades
!
Do not pull on the wiper blade inserts.
They could tear.
X
Fold the wiper arm forward until it snaps
into place.
X
Turn the wiper blade at a right angle to
wiper arm.
X
Slide the wiper blade sideways out of the
retainer.
Installing wiper blades
X
Slide the wiper blade onto the wiper arm in
opposite direction of arrow (Y page 276).
X
Rotate the wiper blade into a position
parallel to the wiper arm.
X
Fold the wiper arm backward to rest on the
windshield.
Make sure you hold on to the wiper when
folding the wiper arm back.
!
Make sure the wiper blades are installed
properly. Improperly installed wiper blades
may cause windshield damage.
Flat tire
Safety notes
G
Warning!
The dimensions of the spare wheel are
different from those of the road wheels. As a
result, the vehicle handling characteristics
276
Flat tire
Practical hints
230_AKB; 6; 22, en-US
d2ureepe, Version: 2.11.8.1
2009-07-28T18:49:58+02:00 - Seite 276