Filter
Top Products
Manually unlocking the gear selector
lever
If the vehicle’s electrical system is
malfunctioning, the gear selector lever could
remain locked in park position P. In this case
the gear selector lever can be unlocked
manually, e.g. to tow the vehicle.
X
Engage the parking brake.
!
Do not use sharp objects to loosen the
gear selector lever cover in the center
console, as this could damage the gear
selector lever cover or the center console.
X
Insert a flat, blunt object into the right edge
of gear selector lever cover : at the
positions indicated by the arrows.
X
Loosen gear selector lever cover : using
this object.
X
Pull gear selector lever cover : out and
remove.
X
Simultaneously push down release ; and
move the gear selector lever out of park
position P.
The gear selector lever is unlocked.
i
The gear selector lever is locked again as
soon as you move it back to park position
P.
Fuel filler flap
G
Warning!
Avoid contact with the vehicle walls as they
may contain sharp edges. Otherwise, you
could injure yourself while releasing the fuel
filler flap.
In case the central locking system does not
release the fuel filler flap, you can open it
manually.
The fuel filler flap release is located on the
passenger side in the cargo compartment
behind the cover.
X
Open the tailgate (Y page 71).
X
Open the passenger-side trim panel
(Y page 309).
X
Pull fuel filler flap release :.
The fuel filler flap is unlocked.
X
Open the fuel filler flap (Y page 212).
X
Close the passenger-side trim panel.
X
Close the tailgate.
Resetting activated NECK-PRO active
front head restraints
If the NECK-PRO active front head restraints
have been triggered in a rear-end collision,
they must be reset.
You can tell that the NECK-PRO active front
head restraints have been triggered when
they have been moved forward and cannot be
adjusted.
Resetting activated NECK-PRO active front head restraints
301
Practical hints
X204_AKB; 3; 23, en-US
d2ureepe, Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 301
Z