Mercedes-Benz 2010 GLK350 Automobile User Manual


 
Display messages Possible causes/consequences and M Solutions
+
Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine is running because the SmartKey is not in the vehicle.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Search for the SmartKey.
The vehicle cannot be locked centrally nor can the engine
be started again after the engine is stopped.
+
Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine is running because there is strong radio-frequency
interference.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Remove the KEYLESS-GO button from the starter switch
(Y page 77).
X
Operate the vehicle with the SmartKey in the starter switch.
+
Key Not
Detected
(message
appears in
white)
The SmartKey with KEYLESS-GO is momentarily not detected.
X
Change the position of the SmartKey in the vehicle.
X
If necessary, remove the KEYLESS-GO button from the
starter switch (Y page 77).
+
Remove
'Start'
Button
and
Insert Key
The KEYLESS-GO system is malfunctioning.
X
Remove the KEYLESS-GO button from the starter switch
(Y page 77).
X
Operate the vehicle with the SmartKey in the starter switch.
¥
Check
Washer
Fluid
The water level has dropped to approximately 1.1 US qts
(1.0 l).
X
Add washer fluid (Y page 217).
278
Vehicle status messages in the multifunction display
Practical hints
X204_AKB; 3; 23, en-US
d2ureepe, Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 278