Filter
Top Products
X
Attach reversible ratchet ; to jack : in
such a way that the word UP can be seen.
Before placing the jack and the reversible
ratchet back into the vehicle tool kit:
X
Fully collapse the jack (storage position).
X
Remove the reversible ratchet.
Spare wheel
G
Observe Safety notes, see page 312.
The spare wheel is located in the space
underneath the cargo compartment floor.
X
Removing: Open the tailgate (Y page 71).
X
Lift the cargo compartment floor and
secure it on the upper cargo compartment
lip (Y page 194).
!
To prevent damage, always disengage the
securing hook from upper cargo
compartment lip and lower the cargo
compartment floor before closing the
tailgate.
X
Remove storage compartment :
(Y page 260).
X
Remove retaining screw ; by turning it
counterclockwise.
X
Remove spare wheel =.
X
Take the spare wheel bolts from the vehicle
tool kit (Y page 260).
For information on mounting the spare wheel,
see “Flat tire” (Y page 312).
Storing the spare wheel after use
If you wish to store the spare wheel after use,
carry out the following steps. Otherwise, the
spare wheel may not fit into the spare wheel
well.
!
Make sure the spare wheel is dry before
storing it.
X
Take the valve extractor from the vehicle
tool kit (Y page 260).
X
Unscrew the valve cap from the valve of the
collapsible tire.
X
Use the valve extractor to unscrew the
valve insert from the valve.
X
Allow the air to escape.
i
It may take a few minutes for the
collapsible tire to deflate completely.
X
Use the valve extractor to screw the valve
insert back into the valve.
X
Screw the valve cap back onto the valve.
X
Place the valve extractor back into the
vehicle tool kit.
X
Place spare wheel = into the spare wheel
well (Y page 262).
X
Secure spare wheel = by turning retaining
screw ; clockwise (Y page 262).
Vehicle status messages in the
multifunction display
Notes
Warning and malfunction messages appear in
the multifunction display located in the
instrument cluster.
Certain warning and malfunction messages
are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in this
Operator’s Manual.
High-priority messages appear in the
multifunction display in red color.
262
Vehicle status messages in the multifunction display
Practical hints
X204_AKB; 3; 23, en-US
d2ureepe, Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 262