Filter
Top Products
Setting up rear seat backrest
G
Warning!
If a red indicator is visible with the seat
backrest up, then the seat backrest is not
properly locked into position.
Always lock seat backrest in its upright
position when rear seat bench is occupied, or
the expanded cargo volume is not in use.
Check for secure locking by pushing and
pulling on the seat backrest.
In an accident, during hard braking or sudden
maneuvers, loose items will be thrown around
inside the vehicle. This can cause injury to
vehicle occupants unless the items are
securely fastened in the vehicle.
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
transporting cargo.
X
If necessary, move the driver’s and/or front
passenger seat forward (Y page 79).
!
Make sure that the seat belt is not
pinched when folding rear seat backrest.
X
Fold the respective seat backrest :
rearward until it engages.
Red indicator ; is no longer visible.
X
Adjust the rear seat head restraints, if
necessary (Y page 79).
X
Adjust the front seats to the desired
position.
Cargo compartment cover blind
!
With the cargo compartment cover blind
installed, do not pile luggage higher than
the lower edges of the rear side windows.
X
Rolling out: Pull out cargo compartment
cover blind : and hook left and right-hand
sides into holders.
X
Rolling up: Unhook cargo compartment
cover blind : and guide it forward.
X
Removing: Roll up cargo compartment
cover blind :.
X
Press bottom right-hand side of handle ;
to the left.
X
Installing: Position cargo compartment
cover blind : at bore hole on the left-hand
side.
X
Press handle ; to the right.
X
Let cargo compartment cover blind :
engage in corresponding recess.
X
Make sure cargo compartment cover
blind : is securely fastened.
190
Loading and storing
Controls in detail
X204_AKB; 3; 23, en-US
d2ureepe, Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 190