Filter
Top Products
or
X
Press button l on the keypad in audio
control unit briefly.
The Enter Frequency submenu appears.
X
Entering frequency with keypad: Enter
desired frequency with buttons k to
x on the keypad in audio control unit.
The audio system tunes in to the frequency
entered.
i
It is not possible to enter a frequency in
the respective wave band which is outside
the frequency range.
X
Exiting menu without making an entry:
Press button k in the center console
(Y page 129).
Storing stations
You can store ten AM and ten FM stations in
the memory.
i
If you select a memory preset which is
already in use, it will be overwritten by the
new station.
Storing stations manually with keypad
X
Tune in desired station.
The basic menu appears in the audio
display.
X
Press and hold desired station button
k to x until a brief signal tone
sounds.
The station is stored.
Storing stations manually with station
memory menu
X
Tune in desired station.
The basic menu appears in the audio
display.
X
Press W when the main area is active.
or
X
Select Presets.
The station memory display appears in the
audio display.
The dot # in front of a memory position
indicates that the currently tuned station is
stored there.
X
Selecting a memory position: Slide
ZVÆ or rotate cVd.
X
Storing a station to a selected memory
position: Press and hold W until a brief
signal tone sounds.
or
X
Press and hold desired station button
k to x on keypad, until a brief signal
tone sounds.
The station is stored.
Audio system
139
Controls in detail
X204_AKB; 3; 23, en-US
d2ureepe, Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 139
Z