Filter
Top Products
X
Hook belt hook : into cargo tie-down
ring ; in direction of arrow.
X
Pull tightening belt = by the loose end in
direction of arrow until the cargo net is
pulled tight.
X
After driving a short distance, make sure
the cargo net is still tight and, if necessary,
pull it tight again.
Loosening the cargo net
Belt hook attached behind the front seats
X
Loosen the tightening belt by pulling
buckle : upward in direction of arrow.
X
Remove belt hook ; from cargo tie-down
ring =.
Removing and storing the cargo net
X
Take cargo net bar ; (Y page 191) out of
holder : (Y page 191).
X
Press the red button on the upper and lower
cargo net bar.
X
Fold the cargo net.
X
Roll up the cargo net.
X
Close the hook and loop fasteners on the
cargo net package.
Front storage compartments
G
Warning!
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
storing objects in the vehicle. Put luggage or
cargo in the cargo compartment if possible.
Do not pile luggage or cargo higher than the
seat backrests.
Keep compartment lids closed. This will help
to prevent stored objects from being thrown
about and injuring vehicle occupants during
R
braking
R
vehicle maneuvers
R
an accident
Glove box
Depending on vehicle equipment, an AUX
socket or a media interface is located in the
glove box. For information on Audio AUX
mode, see (Y page 154) or on media
interface, see separate COMAND system
operating instructions.
The glove box can be ventilated
(Y page 181).
X
Opening: Pull glove box lid release :.
X
Closing: Push glove box lid ; upwards
until it engages.
You can lock the glove box, e.g. when the
vehicle is in the shop for service.
The glove box can only be locked or unlocked
with the mechanical key.
192
Loading and storing
Controls in detail
X204_AKB; 3; 23, en-US
d2ureepe, Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 192