Mercedes-Benz 2010 GL350 BlueTEC Automobile User Manual


 
X
Turn off the engine.
X
Remove the SmartKey from the starter
switch.
X
Vehicles with KEYLESS-GO: Open the
driver’s door (this puts the starter switch in
position 0, same as with the SmartKey
removed from the starter switch). The
driver’s door then can be closed again.
Fuse box in passenger compartment
!
Do not use sharp objects such as a
screwdriver to open the fuse box cover in
the dashboard. You could damage the fuse
box cover or the dashboard.
The fuse box is located behind a cover in the
dashboard on the front passenger side.
X
Open the front passenger door.
X
Opening: Open the glove box.
X
Opening: Insert flat, blunt object as a lever
into the edge of fuse box cover : at the
position indicated by the arrow.
X
Loosen fuse box cover : from the
dashboard using the lever.
X
Using your hands, pull fuse box cover :
out and remove.
X
Closing: Hook fuse box cover : into
holders on the front of the dashboard.
X
Press fuse box cover : back on until it
engages.
!
The fuse box cover must be properly
positioned as described. Otherwise,
moisture or dirt could enter the fuse box
and possibly impair fuse operation.
Fuse box in engine compartment
X
Open the hood.
Example illustration fuse box GL 450 (GL 350
BlueTEC, GL 550 similar)
X
With a dry cloth, remove any moisture from
fuse box cover :.
X
Opening: Pull clamps ; in direction of
arrow.
X
Lift fuse box cover : up.
X
Closing: Make sure the sealing rubber is
positioned properly.
X
Press fuse box cover : down and secure
with clamps ;.
!
The fuse box cover must be properly
positioned as described. Otherwise,
moisture or dirt could enter the fuse box
and possibly impair fuse operation.
X
Close the hood after checking or replacing
fuses.
356
Fuses
Practical hints
X164_AKB; 5; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 356