Filter
Top Products
X
Turn housing cover ; counterclockwise
and remove it.
X
Turn bulb socket C with the bulb
counterclockwise and remove it.
X
Pull the bulb out of bulb socket C.
X
Gently press the new bulb into bulb socket
C.
X
Place bulb socket C back into the housing
and turn it clockwise until it engages.
X
Align housing cover ; and turn it
clockwise until it engages.
Parking and standing lamp bulb,
front turn signal lamp bulb,
side marker lamp bulb
X
Turn respective bulb socket =, ? or A
(Y page 331) with the bulb
counterclockwise and remove it.
X
Pull the bulb out of the bulb socket.
X
Gently press the new bulb into the bulb
socket.
X
Place bulb socket =, ? or A back into
the housing and turn it clockwise until it
engages.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
$.
Tail lamp unit
To access the tail lamp units, you first have to
remove the cover in the corresponding side
trim panel of the cargo compartment.
X
Open the tailgate.
Opening the driver’s side trim panel
X
Turn lock : counterclockwise by 90°.
X
Remove cover ;.
X
Remove everything from storage
compartment ?.
X
Insert a suitable object such as a coin into
the slot of lock =.
X
Turn lock = counterclockwise by 90°.
X
Remove storage compartment ?.
Opening the passenger-side trim panel
332
Replacing bulbs
Practical hints
X164_AKB; 5; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 332