Filter
Top Products
Display messages Possible causes/consequences and M Solutions
+
Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine is running because the SmartKey is not in the vehicle.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Search for the SmartKey.
The vehicle cannot be locked centrally nor can the engine
be started again after the engine is stopped.
+
Key Not
Detected
(message
appears in
red)
The SmartKey with KEYLESS-GO is not detected while the
engine is running because there is strong radio-frequency
interference.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Remove the KEYLESS-GO button from the starter switch
(Y page 80).
X
Operate the vehicle with the SmartKey in the starter switch.
+
Key Not
Detected
(message
appears in
white)
The SmartKey with KEYLESS-GO is momentarily not detected.
X
Change the position of the SmartKey in the vehicle.
X
If necessary, remove the KEYLESS-GO button from the
starter switch (Y page 80).
X
Operate the vehicle with the SmartKey in the starter switch.
+
Pull
starting
button
out then
insert
key.
The SmartKey with KEYLESS-GO is permanently not detected.
X
Remove the KEYLESS-GO button from the starter switch
(Y page 80).
X
Operate the vehicle with the SmartKey in the starter switch.
X
Contact an authorized Mercedes-Benz Center.
~
Bluetooth
Ready
The telephone has not yet been connected to the COMAND
system via Bluetooth
®
.
X
Connect the telephone to the COMAND system via
Bluetooth
®
.
¥
Top Up
Washer
Fluid
The fluid level has dropped to approximately
1
/
3
of total
reservoir capacity.
X
Add washer fluid (Y page 232).
Vehicle status messages in the multifunction display
305
Practical hints
X164_AKB; 5; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 305
Z