Mercedes-Benz 2010 GL350 BlueTEC Automobile User Manual


 
With SmartKey:
X
Make sure the ignition is switched on.
X
With the vehicle at a standstill, depress the
brake pedal and keep it pressed.
X
Shift the automatic transmission into
neutral position N.
X
Release the brake pedal.
X
If engaged, release the parking brake.
X
Switch off the ignition and leave the
SmartKey in the starter switch.
With KEYLESS-GO:
X
Make sure the ignition is switched on.
X
With the vehicle at a standstill, depress the
brake pedal and keep it pressed.
X
Shift the automatic transmission into park
position P.
X
Release the brake pedal.
X
Remove the KEYLESS-GO start/stop
button from the starter switch.
X
Insert the SmartKey into the starter switch.
X
Switch on the ignition.
X
Depress the brake pedal and keep it
pressed.
X
Shift the automatic transmission into
neutral position N.
X
Release the brake pedal.
X
If engaged, release the parking brake.
X
Switch off the ignition and leave the
SmartKey in the starter switch.
Shifting into reverse gear R
X
With the vehicle at a standstill, depress the
brake pedal.
X
Move the gear selector lever up past the
resistance point.
Shifting into drive position D
X
With the vehicle at a standstill, depress the
brake pedal.
X
Move the gear selector lever down past the
resistance point.
Shifting procedure
The automatic transmission selects individual
gears automatically, depending on
R
the selected gear range (Y page 118)
R
the position of the accelerator pedal
R
the vehicle speed
With drive position D selected, you can
influence transmission shifting by limiting or
extending the gear range.
Transmission positions
The current transmission position appears in
the multifunction display.
:
Transmission position indicator
If the current transmission position does not
appear in the multifunction display due to a
malfunction, for example, make sure that the
automatic transmission is in the desired
position.
X
Shift the automatic transmission into drive
position D.
X
Do not limit the gear range.
X
Drive off carefully.
116
Automatic transmission
Controls in detail
X164_AKB; 5; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 116