Filter
Top Products
Version 1
Version 2
X
Version 1 only: Open flap C on the
electric air pump.
X
Pull plug ? and air hose A out of the pump
housing.
X
Screw the air pump’s air hose A onto
flange B of TIREFIT container :.
X
Stick TIREFIT container : upside down
into notch ; of the electric air pump.
X
Unscrew the valve cap of the damaged tire
from tire valve E.
Version 1
X
Version 1 only: Close vent screw F on
pressure gauge G.
X
Screw filler hose D onto tire valve E.
X
Insert electrical plug ? into the cigarette
lighter socket (Y page 206) or a power
outlet (Y page 207).
X
Turn the SmartKey in the starter switch to
position 1.
or
X
Vehicles with KEYLESS-GO: Press the
KEYLESS-GO start/stop button once. Do
not depress the brake pedal.
X
Press I on electric air pump switch =.
The electric air pump is switched on and
inflates the tire.
i
First, the sealing is pumped into the tire.
The pressure may briefly rise to up to 73 psi
(5 bar). This is normal and not an indication
of a malfunction. Do not switch off the
electric air pump.
X
Let the electric air pump inflate the tire for
approximately 5 minutes.
The pressure gauge must display at least
26 psi (1.8 bar).
G
Warning!
The air hose can become hot during inflation.
Please exercise appropriate caution.
!
Do not operate the electric air pump
longer than 8 minutes without interruption.
Otherwise it may overheat.
Flat tire
331
Practical hints
212_AKB; 2; 41, en-US
d2ureepe, Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 331
Z