Filter
Top Products
X
Press button a again if you would like
to change the current status.
After the function has been activated, the
PRE-SAFE
®
Brake indicator Ä appears
in the lower part of the multifunction
display. When the HOLD function is
switched on, the PRE-SAFE
®
Brake
indicator Ä will not appear.
For more information on PRE-SAFE
®
Brake,
see (Y page 69).
Switching ATTENTION ASSIST on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Attention Asst. function
X
Press button a.
X
Press button a again if you would like
to change the current status.
After the function has been activated, the
ATTENTION ASSIST indicator À appears
on the left-hand side of the multifunction
display.
For more information on ATTENTION ASSIST,
see (Y page 178).
Switching Blind Spot Assist on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Blind Spot Asst. function
X
Press button a.
X
Press button a again if you would like
to change the current status.
Depending on the previous status, Blind
Spot Assist: will be Enabled or
Disabled.
For more information on Blind Spot Assist,
see (Y page 175).
Switching Lane Keeping Assist on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Lane Keep. Asst. function
X
Press button a.
X
Press button a again if you would like
to change the current status.
After the function has been activated, the
Lane Keeping Assist indicator Ã
appears in the lower part of the
multifunction display.
For more information on Lane Keeping
Assistance, see (Y page 177).
Service menu
In the Serv. menu the following functions are
available:
138
Control system
Controls in detail
212_AKB; 2; 41, en-US
d2ureepe, Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 138